June 8, 2016

Terms of Use

Legal Terms and Conditions

Cymer is an affiliate of ASML Holding N.V., a corporation established under the laws of the Netherlands, having its registered seat in Veldhoven, the Netherlands, hereinafter together with its subsidiaries and affiliates, as well as separately, referred to as “ASML”.

The following terms constitute a legal agreement between you and ASML. By accessing, browsing and/or using this web site (the “Site”) or downloading any materials from this Site, you acknowledge that you have read, understood and agree to be bound by, these terms and to comply with all applicable laws and regulations. If you do not agree to these terms, do not use this Site or download any materials from it.

The materials on this Site are provided by Cymer-ASML as a service and may be used for informational purposes only. Single copies may be downloaded subject to the provisions below.

The materials on this Site regarding or relating to ASML and its products, services, suppliers and contractors, are provided “as is” without any express or implied warranty of any kind, such as merchantability, non-infringement of intellectual property or fitness for any particular purpose.

In no event shall ASML or any of its suppliers or contractors be liable for any (consequential) damages whatsoever arising out of the use of this site, or any information, statements and comments contained within, even if ASML has been informed of the possibility of certain damages. In addition, ASML does not warrant the completeness or accuracy of the information, data, text, graphics, links or other items contained within these materials. These or other limitations of liability do not apply if prohibited by law.

ASML does not want to receive confidential or proprietary information through this Site. Please note that any information or material sent to ASML via this Site will be deemed not to be confidential. By sending ASML any information or material, you agree that ASML is free to use any ideas, concepts or know-how that you send ASML for any purpose.

ASML may make changes to these materials, or to the products described therein, at any time without notice. ASML also makes no commitment to update the materials.

Regarding financial statements and other publications, only the original printed version can be considered the authentic version.

Linked sites are not under the control of ASML and ASML is not responsible for the content of any linked site or any link contained in a linked site. ASML reserves the right to terminate any link or linking program at any time.

ASML does not endorse companies or products to which it links, and reserves the right to note such on its web pages. If you decide to access any of the third party sites linked to this Site, you do this entirely at your own risk.

ASML, ASM Lithography, TWINSCAN, PAS 5500, PAS 5000, SA 5200, ATHENA, QUASAR, IRIS, ILIAS, FOCAL, CPL, DDL, Micralign, Micrascan, 3DAlign, 2DStitching, 3DMetrology, MaskTools, LithoServer, LithoGuide, Scattering Bars, MaskWeaver, LithoCruiser, LithoCool, AGILE, ImageTuner, EFESE and the ASML logo are trademarks of ASML. Cymer, ELS, NANOLITH, NanoLith 7000, CymerOnLine, ONPULSE, GLX, XLR, TCZ, Cymer Digital Studio, and the Cymer logo are trademarks of Cymer. The trademarks may be used either alone or in combination with a further product designation. Starlith, AERIAL, and AERIAL II are trademarks of Carl Zeiss.

Nothing in this publication is intended to make representations with regard to whether any trademark is registered or to suggest that any sign other than those mentioned should not be considered to be a trademark of ASML or of any third party.

These terms and conditions are governed by, construed and enforced in accordance with the laws of the Netherlands. Disputes arising herefrom are exclusively subject to the jurisdiction of the District Court of ‘s-Hertogenbosch.